Kupoliniai stoglangiai Lamilux F100 W
Gamintojas: LAMILUX
Tomas Juknis
Aprašymas
The new standard for the industrial flat roof
Greater stability, greater safety, greater comfort
More than expected, buildings are stressed by daily environmental factors and increasing extreme weather events. Sudden storms and gale-force winds, heavy rain, hail or heavy snow put particular strain on roofs and the skylights integrated in them. As one of Europe's leading manufacturers of skylights, we see it as our responsibility to constantly adapt our daylight systems to new influences in order to equip buildings for extreme weather events at an early stage. We have been developing and testing beyond standardised minimum requirements for over 70 years. Because when application practice demands more than expected, we want to deliver more than expected with our innovations. We therefore optimise and test our skylights beyond common standards and set our products to unique standards. For our customers and their projects, we achieve more than expected with our domed rooflights. The best proof of this is our LAMILUX Rooflight F100 W. Greater stability under heavy loads, greater safety in extreme weather conditions, and greater comfort during installation thanks to a geometrically optimised design. We have further improved the design of our proven classic – the LAMILUX Rooflight F100 – with a wave shape.
The clever geometry, which requires no more material, equips the dome rooflight for future challenges. This is because the new wave shape of the dome shell ensures better load transfer and guarantees more rigidity without using more material. In this way, the Rooflight F100 W remains watertight even at higher wind speeds and withstands more wind and snow. Depending on the size and variant of the domed rooflight, the load-bearing capacity for snow increases by up to four times compared to rooflights previously available on the market. In addition, this rooflight is also resistant to heavy rainfall of 8 litres per square metre and minute and simultaneous hurricanes of up to 115 km/h. The rooflight has even been inspected and tested for the highest hail resistance class HW5. The distinct advantage of the Rooflight F100 W: The wave-shaped LAMILUX rooflight dome can even withstand 50 mm hailstones hitting the rooflight from the sky at a final speed of 111 km/h. In addition to technical advantages, the Rooflight F100 W is impressive thanks to its even better handling on the roof and during installation, as the design improvement of the geometry without additional material does not generate any additional weight. Our LAMILUX Rooflight F100 W revolutionises the standards for the industrial flat roof.
The variants
Rooflight F100 W
Glazing types
The glazing range of the rooflight system takes into account the individual requirements of the skylight:
- Daylight intake through transparency and light diffusion
- Energy efficiency/thermal insulation
- Sun protection/protection against heat
- Soundproofing/hail protection
Glazing materials
We achieve the advantages through glazing materials selected according to the application:
- Glass fibre reinforced plastic
- Composite
- Impact-resistant composite
- Rooflight F100 W also optionally available as a solid insulated lid
- Ut-value: approx. 2.6 - 2.7 W/(m²K)
- Energy transmission: 37 - 86 %*
- Translucency: 42 - 86 %*
* Material dependent
- Ug=value approx. 1.8 - 2.0 W/(m²K)
- Energy transmission: 31 - 80 %
- Translucency: 41 - 80 %
- Ug=value approx. 1.5 - 1.6 W/(m²K)
- Energy transmission: 32 - 75 %
- Translucency: 42 - 75 %
- Ut value: approx. 1.3 W/(m²K)
- Energy transmission: 31 - 54 %
- Translucency: 18 - 49 %
LAMILUX size variety
Rooflight F100 W
1 - Clear internal opening = order size - 18 cm
2 - Structural roof opening size = order size
3 - Upstand heights: 15 / 30 / 40 / 50 / 70 cm
4 - Base flange: 16 cm
LAMILUX upstands
The ideal connection for your flat roof
LAMILUX GRP upstand
The upstand forms the base for the rooflight construction. It provides the ideal thermal connection to the building structure and thus makes a decisive contribution to the thermal insulation performance. Through our own GRP upstand production, we offer the highest quality and customised variety first-hand.
Our GRP upstands can be produced in an extremely wide range of variants in terms of order size (structural roof opening) and height and also offers many options for individual implementation of the roof connections.
The most important details at a glance:
- Fully heat-insulated upstand made of glass-fibre reinforced composite, optionally available with heat-insulated base flange
- Available heights: 15 cm, 30 cm, 40 cm, 50 cm, 70 cm*
- Available in 50 different sizes
- In two different insulation thicknesses
- Seamless appearance
- Safety in case of fire due to compliance with DIN 18234 without additional measures
- Completely pre-assembled delivery to the construction site
* only available in certain sizes.
Metal upstands
- PVC head formation to reduce thermal bridges
- Optionally with or without pressure-resistant thermal insulation (building material class A1)
- Height: 40, 50 or 60 cm
- Coil coated in RAL 9016
- Sheet steel – Building material class A1
- For isopanel roofs
- Base flange either flat or profiled (also available with thermal insulation on underside, see image)
- Suitable only for buildings with low thermal requirements
- Height: 30 cm
- Semi-machined or RAL coating
Connection technology used in LAMILUX upstands
Ideal building connection for your flat roof
Hard PVC connecting rail laminated onto base flange at the factory and seal-welded in the corners. High polymer PVC and VAE roof sheeting can be welded directly onto the base flange with greater ease using an expanding air or hot air welding process. The illustration shows a thermally insulated base flange, the hard PVC connecting rail is also optionally available without a thermally insulated base flange.
Comprising ready clamping profiles incl. spray water-tight fastening rivets.
For the mechanical attachment of pulled upwards sealants on the upstand (through the use of foil or bitumen).
A variant of the GRP upstand with a base flange bevelled on both sides is available for structural attachment to profile roofs. For further requirements, e.g. on-site upstand, it is also available in a four-sided bevelled design.
LAMILUX fall-through protection grids
For greater safety on your flat roof
- Testing and approval according to GS-BAU-18
- Complete pre-assembly onto the upstand
- Tested according to DSG 1400 with 600 Joule and according to DSG 2000 with 1200 Joule
- Testing and approval according to GS-BAU-18
- Can be retrofitted onto almost all LAMILUX upstands
- Tested according to DSG 1400 with 600 Joule
- Testing and approval according to GS-BAU-18
- Made of galvanised sheet steel
- Tested according to DSG 1400 with 600 Joule
Safety net
- Testing and approval according to GS-BAU-18
- Visually discreet mounting between the dome shells
- Tested according to DSG 1400 with 600 Joule
- Testing and approval according to GS-BAU-18
- Burglary-resistant in accordance with ENV 1627
- Tested according to DSG 1400 with 600 Joule
- Metal screen with attractive deciduous tree effect provides additional hail protection
- Tested according to DSG 1400 with 600 Joule
- Hinged fall-through protection grid for rooflights with roof access function
- Only offers fall-through protection when closed
- Tested according to DSG 2000 with 1200 Joule
Rooflight opening variants
For ensuring fresh air and safety in your building
- Stroke height: 30cm or 50cm
- Protection category: IP 54
- Stroke height: 30cm, 50cm or 75cm
- Protection category: IP 65
- Stroke height: 30cm, 50cm or 75cm
- Protection category: IP 32 to IP 54
- Stroke height: 30cm, 50cm or 75cm
- Protection category: IP 32 to IP 54
- Stroke height: 30cm, 50cm or 75cm
- Required operating pressure: 8 bar
- Stroke height: 28cm
- Optionally with hand crank rod in various lengths up to 400cm
- Tested to DIN EN 12101-2
- Tested to DIN EN 12101-2
LAMILUX accessories
Rooflight F100 W
- Magnetic switch integrated in the frame profile for sensing the closure status
- Option to connect to an alarm system
- Electrically operated, interior sun protection
- Attachment to the inside of the upstand
- Integration in the upstand
- Easy removal for cleaning purposes
- Easy access to the flat roof for maintenance and repair work
- Optionally available as electric version
- Further roof access solutions are offered by our Flat Roof Access Hatches
- Weatherproof cover and integrated insect protection
- Can be integrated into 30 cm, 40 cm, 50 cm, 70 cm upstands for ventilation and extraction
- Air flow volume: 180 m³/h
- Protection category: IP 34
- With weather protection hood
- Can be integrated into the 50cm and 70cm upstand for ventilation and extraction
- Air flow volume: 840 m³/h
- Protection category: IP 44
- For automated closing of rooflights in the event of wind and rain
- Factory mounting on the dome frame
- Geometrical smoke ventilation for ventable rooflight
- Composition: SHEV control unit with emergency power supply, 2 SHEV buttons, 1 fan button and spindle motor (24 V, 500 mm stroke)
Technical details
Rooflight F100 W
Design details
.png)
