Užduokite klausimą vadybininkui

• Available in double or triple glazing, toughened safety glass (TSG) on the outside and laminated safety glass (LSG) on the inside (LSG can be fitted with a clear or matt-light film) with Ug-values of 1.1 to 0.7 W/m²K
• Structure completely free of thermal bridges with a Uw-value between 1.3 and 1.0 W/m²K, depending on the glazing (as per EN ISO 10077-1 for a reference element measuring 120cm x 120cm)
• Thermally insulated, jointless GRP upstand, with a height of 15, 30, 40 or 50cm, with U-values of 0.5 W/m²K to 0.9 W/m²K (depending on the characteristics)
• Outstanding air-tightness due to the new double balloon sealing system: Performance class 4 – tested in accordance with EN 12207
• Thermally optimised structural attachment, such as a thermally insulated base flange
• Life-cycle assessment made easy: There is a comprehensive Environmental Product Declaration for the Glass Skylight F100 in accordance to ISO EN 15804

COMFORT & DESIGN

• Farewell to dirty edges: The newly designed frame profile has a smooth transition between the glazing and the frame, allowing rainwater to run off without any obstructions
• The new chain drive technology complies with protection class IP 54 and allows easy opening for ventilation purposes
• Chain drive – concealed from view and equipped with new, IP 54-rated technology
• Our Glass Skylight F100 is BIM-ready – Download at bimobject.com
• Generous daylight incidence and lasting clear views due to scratchproof glazing
• Extra convenience, if required, with structural mounts for membrane roofs, prepared at the factory
• Optimised sound insulation and minimised rain noise due to special glazing (Rwp = 38 dB)
• White, silk-matt appearance inside – no additional drywall construction required
• Optional connection to comfort control unit with wireless remote controls
• Sun protection inside and outside (optional)

STABILITY

• Tested watertightness, even in high wind speeds (driving rain impermeability, in accordance with EN 12208, Class E 1500)
• Very high load-bearing capacity due to optimised profiles 
• Approved fall-through protection
• Excellent stability under wind and snow loads
• UV-resistant edge bond

SAFETY

• The first building approved glass skylight in “Structural Glazing” design – certified by the German Institute for Structural Engineering (Deutsche Institut für Bautechnik, DIBt) in Berlin
• Condensation resistant between glass panels, due to thermally decoupled edge bond, unlike plastic domes
• Preventive fire protection: Compliance with DIN 18234 – to prevent fire spread on the roof without additional measures such as gravel fill
• Can be used as a SHEV system in staircases
• Delivery of Glass Skylight F100 completely pre-assembled on the upstand 
• Resistance to external fire exposure from flying sparks and radiant heat with classification B,roof(t1) according to DIN EN 13501-5

• The first building approved glass skylight in “Structural Glazing” design – certified by the German Institute for Structural Engineering (Deutsche Institut für Bautechnik, DIBt) in Berlin
• Optional opalescent thermal protection insulating glazing with matt-light film
• Outer pane made of toughened safety glass as standard

• Available with upstand heights of 15, 30, 40 and 50 cm
• Seamless upstand
• Complies with DIN 18234 without additional measures
• Element pre-mounted on the upstand, ex works

For renovations of roof surfaces with low inclination, a gradient for water drainage should be artificially created for skylights. For our LAMILUX Glass Skylight F100 a specially manufactured adapter frame now provides the possibility to subsequently create a 5 degree inclination. It can be adapted to every existing substructure and is already completely pre-assembled with the glass skylight when the flat roof window arrives at the construction site.

Outside:

• Can be retrofitted

Shadow glazing package:

• Upper section fitted with TSG and internal sun protection
• Double insulating glazing TSG with a Ug-value of approx. 1.1 W/(m²K) or
• Triple insulating glazing TSG with a Ug-value of approx. 0.7 W/(m²K)

• Convenient remote system for controlling ventilation and shading motors
• Additional motors can be added
• Simple, remote controlled manual operation